53 community entries
Materials & settings
Power, speed and passes that worked for real people on real material. Filter by your machine and laser type, then run a test tile before you commit a full sheet.
These are starting points from community members, not manufacturer specifications. Materials vary between batches and suppliers, machines drift, and lenses get dirty — always test on an offcut first. Never laser PVC, polycarbonate, ABS or any material you can't identify.
3 entries
| Material | Machine | Op | Power | Speed | Passes | DPI | Air | Confirmed |
|---|---|---|---|---|---|---|---|---|
| Black anodised aluminium1.5mm · Diode One pass only. A second pass breaks through to bare metal and goes grey. | LP4 | mark | 100% | 20 mm/s | 1× | 1000 | ||
| Black anodised aluminium1.5mm · Diode Photo work with Stucki dither. Compress tonal range before export. | LP4 | mark | 100% | 15 mm/s | 1× | 1000 | ||
| Black anodised aluminium1.5mm · Fiber Fiber on anodising: much faster than diode and whiter. Low power. | LP3 | mark | 45% | 800 mm/s | 1× | — | — |
Share your settings
Sign in to add an entry. Every contribution saves someone else a sheet of material.
Sign in to contribute