53 community entries
Materials & settings
Power, speed and passes that worked for real people on real material. Filter by your machine and laser type, then run a test tile before you commit a full sheet.
These are starting points from community members, not manufacturer specifications. Materials vary between batches and suppliers, machines drift, and lenses get dirty — always test on an offcut first. Never laser PVC, polycarbonate, ABS or any material you can't identify.
2 entries for LP1 Plus
| Material | Machine | Op | Power | Speed | Passes | DPI | Air | Confirmed |
|---|---|---|---|---|---|---|---|---|
| Veg-tan leather2mm · Diode | LP1 Plus | engrave | 60% | 35 mm/s | 1× | 600 | — | |
| Kraft paperDiode | LP1 Plus | cut | 35% | 150 mm/s | 1× | — |
Share your settings
Sign in to add an entry. Every contribution saves someone else a sheet of material.
Sign in to contribute