53 community entries
Materials & settings
Power, speed and passes that worked for real people on real material. Filter by your machine and laser type, then run a test tile before you commit a full sheet.
These are starting points from community members, not manufacturer specifications. Materials vary between batches and suppliers, machines drift, and lenses get dirty — always test on an offcut first. Never laser PVC, polycarbonate, ABS or any material you can't identify.
3 entries for LP3
| Material | Machine | Op | Power | Speed | Passes | DPI | Air | Confirmed |
|---|---|---|---|---|---|---|---|---|
| 304 stainless steel1mm · Fiber Blue/gold anneal range — vary frequency to shift colour. | LP3 | mark | 80% | 500 mm/s | 2× | — | — | |
| Black anodised aluminium1.5mm · Fiber Fiber on anodising: much faster than diode and whiter. Low power. | LP3 | mark | 45% | 800 mm/s | 1× | — | — | |
| Titanium1mm · Fiber Colour anneals beautifully. Small frequency changes shift hue a lot. | LP3 | mark | 60% | 600 mm/s | 1× | — | — |
Share your settings
Sign in to add an entry. Every contribution saves someone else a sheet of material.
Sign in to contribute