53 community entries
Materials & settings
Power, speed and passes that worked for real people on real material. Filter by your machine and laser type, then run a test tile before you commit a full sheet.
These are starting points from community members, not manufacturer specifications. Materials vary between batches and suppliers, machines drift, and lenses get dirty — always test on an offcut first. Never laser PVC, polycarbonate, ABS or any material you can't identify.
3 entries for LP2 Plus
| Material | Machine | Op | Power | Speed | Passes | DPI | Air | Confirmed |
|---|---|---|---|---|---|---|---|---|
| Natural slate8mm · Diode Lower DPI than you'd expect — fine lines merge into grey mush. | LP2 Plus | engrave | 100% | 25 mm/s | 2× | 500 | ||
| Birch plywood3mm · Diode | LP2 Plus | engrave | 40% | 160 mm/s | 1× | 800 | — | |
| Basswood2mm · Diode Great practice material — cheap and forgiving. | LP2 Plus | engrave | 30% | 220 mm/s | 1× | 800 | — |
Share your settings
Sign in to add an entry. Every contribution saves someone else a sheet of material.
Sign in to contribute