53 community entries
Materials & settings
Power, speed and passes that worked for real people on real material. Filter by your machine and laser type, then run a test tile before you commit a full sheet.
These are starting points from community members, not manufacturer specifications. Materials vary between batches and suppliers, machines drift, and lenses get dirty — always test on an offcut first. Never laser PVC, polycarbonate, ABS or any material you can't identify.
1 entry
| Material | Machine | Op | Power | Speed | Passes | DPI | Air | Confirmed |
|---|---|---|---|---|---|---|---|---|
| Brass2mm · Fiber Deep engraving is 20–60 passes. Measure depth per pass on a ladder first. | LP5 | engrave | 100% | 200 mm/s | 30× | — |
Share your settings
Sign in to add an entry. Every contribution saves someone else a sheet of material.
Sign in to contribute