53 community entries
Materials & settings
Power, speed and passes that worked for real people on real material. Filter by your machine and laser type, then run a test tile before you commit a full sheet.
These are starting points from community members, not manufacturer specifications. Materials vary between batches and suppliers, machines drift, and lenses get dirty — always test on an offcut first. Never laser PVC, polycarbonate, ABS or any material you can't identify.
2 entries
| Material | Machine | Op | Power | Speed | Passes | DPI | Air | Confirmed |
|---|---|---|---|---|---|---|---|---|
| Cast acrylic (black)2mm · Diode Leave top film on, remove bottom film. Kerf 0.15mm. | LP4 | cut | 100% | 9 mm/s | 1× | — | ||
| Cast acrylic (black)3mm · Diode | LP4 | cut | 100% | 5 mm/s | 1× | — |
Share your settings
Sign in to add an entry. Every contribution saves someone else a sheet of material.
Sign in to contribute