53 community entries
Materials & settings
Power, speed and passes that worked for real people on real material. Filter by your machine and laser type, then run a test tile before you commit a full sheet.
These are starting points from community members, not manufacturer specifications. Materials vary between batches and suppliers, machines drift, and lenses get dirty — always test on an offcut first. Never laser PVC, polycarbonate, ABS or any material you can't identify.
3 entries for LX2
| Material | Machine | Op | Power | Speed | Passes | DPI | Air | Confirmed |
|---|---|---|---|---|---|---|---|---|
| Cast acrylic (clear)3mm · Diode Gentle air only — hard airflow frosts the edge and kills the polish. | LX2 | cut | 100% | 6 mm/s | 1× | — | ||
| Cast acrylic (clear)5mm · Diode Edge-lit signage: shallow and dense. Deep grooves read grey when lit. | LX2 | engrave | 25% | 50 mm/s | 1× | 1000 | — | |
| Cast acrylic (clear)5mm · Diode One slow pass beats three fast ones for edge clarity. | LX2 | cut | 100% | 3 mm/s | 1× | — |
Share your settings
Sign in to add an entry. Every contribution saves someone else a sheet of material.
Sign in to contribute