53 community entries
Materials & settings
Power, speed and passes that worked for real people on real material. Filter by your machine and laser type, then run a test tile before you commit a full sheet.
These are starting points from community members, not manufacturer specifications. Materials vary between batches and suppliers, machines drift, and lenses get dirty — always test on an offcut first. Never laser PVC, polycarbonate, ABS or any material you can't identify.
3 entries for LP5
| Material | Machine | Op | Power | Speed | Passes | DPI | Air | Confirmed |
|---|---|---|---|---|---|---|---|---|
| Walnut6mm · Diode Dark grain hides fine detail — bolder line weights read better. | LP5 | engrave | 45% | 150 mm/s | 1× | 1000 | ||
| Rubber stamp sheet2.3mm · Diode Needs serious extraction. Mirror your artwork. | LP5 | engrave | 80% | 90 mm/s | 1× | 500 | ||
| Oak10mm · Diode Open grain takes power unevenly; expect variation between growth rings. | LP5 | engrave | 55% | 120 mm/s | 1× | 800 |
Share your settings
Sign in to add an entry. Every contribution saves someone else a sheet of material.
Sign in to contribute